You can trust JB Weld to make products that aren’t just high quality but easy to use and to carry like the company’s range of syringes with ClearWeld, JB Weld, MarineWeld, WoodWeld, PlasticBonders, PlasticWeld, MinuteWeld, KwikWeld, HighHeat and AutoWeld.
These syringes are handy to have in the workshop, onsite and on the road since they take up very little space and require no special tools to use. With 10 different syringe products there is one that will do whatever job is at hand in the workshop from repairs that need to work under water repairs that require high tensile strenght.
1. ClearWeld is a quick setting, multipurpose two-part epoxy for a strong and lasting bond on most surfaces including tile, most plastics, ceramic, glass, wood, fibreglass, carpet and metal. It cures to a clear, transparent bond when used at thicknesses of less than 15 ml, sets in five minutes and cures in one hour. It has a tensile strength of 3900 PSI.
2. J-B Weld Syringe is the original cold-weld two-part epoxy for strong, lasting repairs to metal and multiple surfaces. It forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. At room temperature, J-B Weld sets in 4-6 hours to a dark grey color. Full cure is reached in 15-24 hours, it has a tensile strength of 5020 PSI and sets to a hard bond overnight.
3. MarineWeld is a specially formulated two part Cold-Weld adhesive system that provides strong, lasting repairs for bonding different or similar surfaces, such as metal, composites, fiberglass and others. It sets in 5 minutes at room temperature, and cures in an hour to a white colour. It may then be shaped, tapped, filed, sanded and drilled, retaining full strength above or below the waters' surface. MarineWeld has a tensile strength of 2350 PSI.
4. PlasticWeld is a specially formulated two-part adhesive and epoxy filler system that will bond a variety of surfaces, such as metal, composites, fibreglass and others. It sets in 5 minutes at room temperature and is fully cured in one hour with a tensile strength of 3900 PSI and cures clear.
5. WoodWeld Syringe is a fast-setting, two-part adhesive system for wood bonding and repairs. When fully cured, it is a light tan colour, and can be shaped, tapped, filed, sanded and drilled. It provides a lasting permanent bond that is stronger than wood.
6. PlasticBonder is a quick-setting, two-part, urethane adhesive system that provides strong and lasting repairs and works on thermoset, carbon fibre composites, thermoplastics and coated metals. It sets in 15 minutes and can be sanded after 30 minutes. With a tensile strength of 3770 PSI. There is a PlasticBonder that sets to a tan colour and one that sets to black, both cure to a hard, permanent bond.
7. MinuteWeld is a special formulated, high-strength, two-part instant setting epoxy that will set under most temperature conditions in one minute. It is designed to adhere to multiple surfaces and can be used on ceramic, tile, glass, stone, most plastics, wood and metal.
8. KwikWeld is a fast-setting version of the original J-B Weld two-part epoxy cold weld system, it forms a permanent bond and can be shaped, tapped, filed, sanded and drilled after curing. It sets in 6 minutes and is fully cured in 4-6 hours and cures to a dark grey colour, is rated at a tensile strength of 3127 PSI and will withstand temperatures up to 300ºF.
9. J-B Weld HighHeat is a two-part epoxy system for lasting, heat-resistant repairs up to 550°F. It forms a permanent bond that has a 4730 PSI strength and is chemical and fuel resistant. At room temperature, HighHeat sets in 1 hour and cures in 24 hours. HighHeat's cure time is accelerated by heat and can cure in 1 hour at 287°C.
J-B Weld AutoWeld is a high-strength, impact-resistant automotive adhesive, filler and sealer, which is ready for sanding and painting in 30 minutes. Great for bumper bars, trim and body panel repairs.
